首页 随笔 乐走天涯 程序资料 评论中心 Tag 论坛 其他资源 搜索 联系我 关于 RSS

评论中心 - 当前页 240


陈泉 于 2009-09-26 17:07(14 年以前) 发表:
与全泉通音的字很多如:
犬荃颧痊虇鳈觠狋

lcz 于 2009-09-26 23:46(14 年以前) 发表:
当然是中国大闸蟹胜利,难道他们不知道大闸蟹已经横行北美了吗?北美 signal crayfish 的老家都被我们占领了,流窜到英国还不是一样穷途末路?

藤苇 于 2009-09-27 19:40(14 年以前) 发表:
你好 我遇到一个问题我没法解决,想向你咨询下
[root@localhost root]# /usr/local/sbin/openvpn --config /usr/local/etc/server.conf
Sun Sep 27 17:41:12 2009 OpenVPN 2.0.9 i686-pc-linux [SSL] [LZO] built on Sep 27 2009
Sun Sep 27 17:41:12 2009 Cannot open dh1024.pem for DH parameters:error:02001002:system library:fopen:NO such file or directory:error:2006D080:BIO routines:BIO_new_file:no such file
Sun Sep 27 14:41:12 2009 Exiting
这是怎么一回事呢?急急急!!!
XiaoHui 回复于 2009-09-27 21:44:
没有 Diffie Hellman 参数或文件的位置没有设置正确。见第七步代码: ./build-dh

藤苇 于 2009-09-27 23:17(14 年以前) 发表:
你好
./build-dh
这一步我做了都是按照你上面说的去做的
export D=`pwd` 只是这一步没做。
export KEY_CONFIG=root/openvpn-2.0.9/easy-rsa/openssl.cnf
export KEY_DIR=root/openvpn-2.0.9/easy-rsa/keys

藤苇 于 2009-09-27 23:25(14 年以前) 发表:
在root/openvpn-2.0.9/easy-rsa/keys下生成了这个文件dh1024.pem 。

藤苇 于 2009-09-27 23:28(14 年以前) 发表:
D=`pwd` 是什么意思呢?
XiaoHui 回复于 2009-09-28 10:22:
pwd 表示当前工作目录

匿名 于 2009-09-28 23:45(14 年以前) 发表:
3年后的今天来看此文,深感此文乃是实事求是的精华!因为时间已经证明这一切了。

反对的人还有什么好说的?

小草 于 2009-09-29 16:16(14 年以前) 发表:
暂住证不收费了,现在租房在南四环大兴寿保庄村有个部门说是流管站的又开始收取什么环卫费,治安管理费,其实什么环卫费就是他们想捞钱向租房人员乱收的,那儿的环境卫生那叫一个脏啊,收费人员穿着便衣,说话粗鲁,简直就丢那身衣服的人,十来个人每天在村的入口处堵着,不交钱,不让进去,甚至动手打人,简直是穷疯了

岳九龙 于 2009-10-01 22:47(14 年以前) 发表:
QQ交流吧,有些字我打不出来只有图片330535226

shenk 于 2009-10-03 14:31(14 年以前) 发表:
四叠字及以上的链接
http://www.zdic.net/zd/zi3/ZdicF0ZdicA8ZdicB0ZdicBB.htm
http://www.zdic.net/zd/zi2/ZdicE3ZdicB5Zdic98.htm
http://www.zdic.net/zd/zi/ZdicE7Zdic87Zdic9A.htm
http://www.zdic.net/zd/zi2/ZdicE3Zdic99Zdic93.htm
http://www.zdic.net/zd/zi3/ZdicF0ZdicA9Zdic99ZdicA1.htm
http://www.zdic.net/zd/zi2/ZdicE4ZdicA8ZdicBB.htm
http://www.zdic.net/zd/zi3/ZdicF0ZdicAAZdic9AZdicA5.htm
http://www.zdic.net/zd/zi/ZdicE5Zdic8FZdic95.htm
http://www.zdic.net/zd/zi/ZdicE8Zdic8CZdicBB.htm
http://www.zdic.net/zd/zi2/ZdicE3ZdicA0ZdicAD.htm
http://www.zdic.net/zd/zi3/ZdicF0ZdicA0Zdic93Zdic99.htm
http://www.zdic.net/zd/zi3/ZdicF0ZdicA0Zdic88Zdic8C.htm
http://www.zdic.net/zd/zi2/ZdicE3Zdic97Zdic8A.htm
http://www.zdic.net/zd/zi2/ZdicE3ZdicB8Zdic9A.htm
http://www.zdic.net/zd/zi3/ZdicF0ZdicA3Zdic8AZdicAD.htm
http://www.zdic.net/zd/zi3/ZdicF0ZdicA3Zdic8AZdicAB.htm
http://www.zdic.net/zd/zi3/ZdicF0ZdicA4ZdicB3ZdicB3.htm
http://www.zdic.net/zd/zi3/ZdicF0ZdicA0ZdicABZdicAC.htm
http://www.zdic.net/zd/zi3/ZdicF0ZdicA3ZdicACZdic85.htm
http://www.zdic.net/zd/zi3/ZdicF0ZdicA5ZdicB7ZdicB9.htm
http://www.zdic.net/zd/zi/ZdicE6Zdic9CZdicA4.htm
http://www.zdic.net/zd/zi3/ZdicF0ZdicA0ZdicBEZdic85.htm
http://www.zdic.net/zd/zi3/ZdicF0ZdicA0Zdic89ZdicAD.htm
http://www.zdic.net/zd/zi3/ZdicF0ZdicA3Zdic9BZdicA7.htm
http://www.zdic.net/zd/zi3/ZdicF0ZdicA3ZdicA1Zdic95.htm
http://www.zdic.net/zd/zi3/ZdicF0ZdicA3ZdicA1ZdicBD.htm
http://www.zdic.net/zd/zi3/ZdicF0ZdicA1ZdicA6ZdicAA.htm

刚学 于 2009-10-04 02:37(14 年以前) 发表:
Apache 按照你说的做了 可就是不行啊
Internet Explorer 无法显示该页面

您可以尝试以下操作:
诊断连接问题

???

g 于 2009-10-08 21:11(14 年以前) 发表:
Quote:
呵呵 好玩

无奈 于 2009-10-09 13:01(14 年以前) 发表:
千万别沉下去

再次拜读~ 于 2009-10-09 22:39(14 年以前) 发表:
呵呵~~~

八年之痒 于 2009-10-11 07:03(14 年以前) 发表:
八年了,八年了,老天……
珍爱生命,远离北京。

Dim 于 2009-10-11 15:45(14 年以前) 发表:
呵呵~~~
我同意你对现代诗的看法。

藤苇 于 2009-10-12 12:58(14 年以前) 发表:
##############################################
# Sample client-side OpenVPN 2.0 config file #
# for connecting to multi-client server. #
# #
# This configuration can be used by multiple #
# clients, however each client should have #
# its own cert and key files. #
# #
# On Windows, you might want to rename this #
# file so it has a .ovpn extension #
##############################################

# Specify that we are a client and that we
# will be pulling certain config file directives
# from the server.
client

# Use the same setting as you are using on
# the server.
# On most systems, the VPN will not function
# unless you partially or fully disable
# the firewall for the TUN/TAP interface.
dev tap
;dev tun

# Windows needs the TAP-Win32 adapter name
# from the Network Connections panel
# if you have more than one. On XP SP2,
# you may need to disable the firewall
# for the TAP adapter.
;dev-node MyTap

# Are we connecting to a TCP or
# UDP server? Use the same setting as
# on the server.
proto tcp
;proto udp

# The hostname/IP and port of the server.
# You can have multiple remote entries
# to load balance between the servers.
remote 172.16.37.83 1194
;remote my-server-2 1194

# Choose a random host from the remote
# list for load-balancing. Otherwise
# try hosts in the order specified.
;remote-random

# Keep trying indefinitely to resolve the
# host name of the OpenVPN server. Very useful
# on machines which are not permanently connected
# to the internet such as laptops.
resolv-retry infinite

# Most clients don't need to bind to
# a specific local port number.
nobind

# Downgrade privileges after initialization (non-Windows only)
;user nobody
;group nobody

# Try to preserve some state across restarts.
persist-key
persist-tun

# If you are connecting through an
# HTTP proxy to reach the actual OpenVPN
# server, put the proxy server/IP and
# port number here. See the man page
# if your proxy server requires
# authentication.
;http-proxy-retry # retry on connection failures
;http-proxy [proxy server] [proxy port #]

# Wireless networks often produce a lot
# of duplicate packets. Set this flag
# to silence duplicate packet warnings.
;mute-replay-warnings

# SSL/TLS parms.
# See the server config file for more
# description. It's best to use
# a separate .crt/.key file pair
# for each client. A single ca
# file can be used for all clients.
ca ca.crt
cert client1.crt
key client1.key

# Verify server certificate by checking
# that the certicate has the nsCertType
# field set to "server". This is an
# important precaution to protect against
# a potential attack discussed here:
# http://openvpn.net/howto.html#mitm
#
# To use this feature, you will need to generate
# your server certificates with the nsCertType
# field set to "server". The build-key-server
# script in the easy-rsa folder will do this.
;ns-cert-type server

# If a tls-auth key is used on the server
# then every client must also have the key.
;tls-auth ta.key 1

# Select a cryptographic cipher.
# If the cipher option is used on the server
# then you must also specify it here.
;cipher x

# Enable compression on the VPN link.
# Don't enable this unless it is also
# enabled in the server config file.
comp-lzo

# Set log file verbosity.
verb 3

# Silence repeating messages
;mute 20
服务器配置
#################################################
# Sample OpenVPN 2.0 config file for #
# multi-client server. #
# #
# This file is for the server side #
# of a many-clients <-> one-server #
# OpenVPN configuration. #
# #
# OpenVPN also supports #
# single-machine <-> single-machine #
# configurations (See the Examples page #
# on the web site for more info). #
# #
# This config should work on Windows #
# or Linux/BSD systems. Remember on #
# Windows to quote pathnames and use #
# double backslashes, e.g.: #
# "C:\\Program Files\\OpenVPN\\config\\foo.key" #
# #
# Comments are preceded with '#' or ';' #
#################################################

# Which local IP address should OpenVPN
# listen on? (optional)
;local a.b.c.d

# Which TCP/UDP port should OpenVPN listen on?
# If you want to run multiple OpenVPN instances
# on the same machine, use a different port
# number for each one. You will need to
# open up this port on your firewall.
port 1194

# TCP or UDP server?
proto tcp
;proto udp

# "dev tun" will create a routed IP tunnel,
# "dev tap" will create an ethernet tunnel.
# Use "dev tap0" if you are ethernet bridging
# and have precreated a tap0 virtual interface
# and bridged it with your ethernet interface.
# If you want to control access policies
# over the VPN, you must create firewall
# rules for the the TUN/TAP interface.
# On non-Windows systems, you can give
# an explicit unit number, such as tun0.
# On Windows, use "dev-node" for this.
# On most systems, the VPN will not function
# unless you partially or fully disable
# the firewall for the TUN/TAP interface.
dev tap
;dev tun

# Windows needs the TAP-Win32 adapter name
# from the Network Connections panel if you
# have more than one. On XP SP2 or higher,
# you may need to selectively disable the
# Windows firewall for the TAP adapter.
# Non-Windows systems usually don't need this.
;dev-node MyTap

# SSL/TLS root certificate (ca), certificate
# (cert), and private key (key). Each client
# and the server must have their own cert and
# key file. The server and all clients will
# use the same ca file.
#
# See the "easy-rsa" directory for a series
# of scripts for generating RSA certificates
# and private keys. Remember to use
# a unique Common Name for the server
# and each of the client certificates.
#
# Any X509 key management system can be used.
# OpenVPN can also use a PKCS #12 formatted key file
# (see "pkcs12" directive in man page).
ca /root/openvpn-2.0.9/easy-rsa/keys/ca.crt
cert /root/openvpn-2.0.9/easy-rsa/keys/server.crt
key /root/openvpn-2.0.9/easy-rsa/keys/server.key # This file should be kept secret

# Diffie hellman parameters.
# Generate your own with:
# openssl dhparam -out dh1024.pem 1024
# Substitute 2048 for 1024 if you are using
# 2048 bit keys.
dh /root/openvpn-2.0.9/easy-rsa/keys/dh1024.pem

# Configure server mode and supply a VPN subnet
# for OpenVPN to draw client addresses from.
# The server will take 10.8.0.1 for itself,
# the rest will be made available to clients.
# Each client will be able to reach the server
# on 10.8.0.1. Comment this line out if you are
# ethernet bridging. See the man page for more info.
server 10.0.0.0 255.255.255.0

# Maintain a record of client <-> virtual IP address
# associations in this file. If OpenVPN goes down or
# is restarted, reconnecting clients can be assigned
# the same virtual IP address from the pool that was
# previously assigned.
ifconfig-pool-persist ipp.txt

# Configure server mode for ethernet bridging.
# You must first use your OS's bridging capability
# to bridge the TAP interface with the ethernet
# NIC interface. Then you must manually set the
# IP/netmask on the bridge interface, here we
# assume 10.8.0.4/255.255.255.0. Finally we
# must set aside an IP range in this subnet
# (start=10.8.0.50 end=10.8.0.100) to allocate
# to connecting clients. Leave this line commented
# out unless you are ethernet bridging.
;server-bridge 10.8.0.4 255.255.255.0 10.8.0.50 10.8.0.100

# Push routes to the client to allow it
# to reach other p10.8.0.1rivate subnets behind
# the server. Remember that these
# private subnets will also need
# to know to route the OpenVPN client
# address pool (10.8.0.0/255.255.255.0)
# back to the OpenVPN server.
;push "route 192.168.11.0 255.255.255.0"
;push "route 192.168.13.0 255.255.255.0"

# To assign specific IP addresses to specific
# clients or if a connecting client has a private
# subnet behind it that should also have VPN access,
# use the subdirectory "ccd" for client-specific
# configuration files (see man page for more info).

# EXAMPLE: Suppose the client
# having the certificate common name "Thelonious"
# also has a small subnet behind his connecting
# machine, such as 192.168.40.128/255.255.255.248.
# First, uncomment out these lines:
client-config-dir /usr/local/etc/ccd
;route 192.168.40.128 255.255.255.248
# Then create a file ccd/Thelonious with this line:
# iroute 192.168.40.128 255.255.255.248
# This will allow Thelonious' private subnet to
# access the VPN. This example will only work
# if you are routing, not bridging, i.e. you are
# using "dev tun" and "server" directives.

# EXAMPLE: Suppose you want to give
# Thelonious a fixed VPN IP address of 10.9.0.1.
# First uncomment out these lines:
client-config-dir /usr/local/etc/ccd
;route 10.9.0.0 255.255.255.252
# Then add this line to ccd/Thelonious:
# ifconfig-push 10.9.0.1 10.9.0.2

# Suppose that you want to enable different
# firewall access policies for different groups
# of clients. There are two methods:
# (1) Run multiple OpenVPN daemons, one for each
# group, and firewall the TUN/TAP interface
# for each group/daemon appropriately.
# (2) (Advanced) Create a script to dynamically
# modify the firewall in response to access
# from different clients. See man
# page for more info on learn-address script.
;learn-address ./script

# If enabled, this directive will configure
# all clients to redirect their default
# network gateway through the VPN, causing
# all IP traffic such as web browsing and
# and DNS lookups to go through the VPN
# (The OpenVPN server machine may need to NAT
# the TUN/TAP interface to the internet in
# order for this to work properly).
# CAVEAT: May break client's network config if
# client's local DHCP server packets get routed
# through the tunnel. Solution: make sure
# client's local DHCP server is reachable via
# a more specific route than the default route
# of 0.0.0.0/0.0.0.0.
;push "redirect-gateway"

# Certain Windows-specific network settings
# can be pushed to clients, such as DNS
# or WINS server addresses. CAVEAT:
# http://openvpn.net/faq.html#dhcpcaveats
;push "dhcp-option DNS 10.8.0.1"
;push "dhcp-option WINS 10.8.0.1"

# Uncomment this directive to allow different
# clients to be able to "see" each other.
# By default, clients will only see the server.
# To force clients to only see the server, you
# will also need to appropriately firewall the
# server's TUN/TAP interface.
;client-to-client

# Uncomment this directive if multiple clients
# might connect with the same certificate/key
# files or common names. This is recommended
# only for testing purposes. For production use,
# each client should have its own certificate/key
# pair.
#
# IF YOU HAVE NOT GENERATED INDIVIDUAL
# CERTIFICATE/KEY PAIRS FOR EACH CLIENT,
# EACH HAVING ITS OWN UNIQUE "COMMON NAME",
# UNCOMMENT THIS LINE OUT.
;duplicate-cn

# The keepalive directive causes ping-like
# messages to be sent back and forth over
# the link so that each side knows when
# the other side has gone down.
# Ping every 10 seconds, assume that remote
# peer is down if no ping received during
# a 120 second time period.
keepalive 10 120

# For extra security beyond that provided
# by SSL/TLS, create an "HMAC firewall"
# to help block DoS attacks and UDP port flooding.
#
# Generate with:
# openvpn --genkey --secret ta.key
#
# The server and each client must have
# a copy of this key.
# The second parameter should be '0'
# on the server and '1' on the clients.
;tls-auth ta.key 0 # This file is secret

# Select a cryptographic cipher.
# This config item must be copied to
# the client config file as well.
;cipher BF-CBC # Blowfish (default)
;cipher AES-128-CBC # AES
;cipher DES-EDE3-CBC # Triple-DES

# Enable compression on the VPN link.
# If you enable it here, you must also
# enable it in the client config file.
comp-lzo

# The maximum number of concurrently connected
# clients we want to allow.
;max-clients 100

# It's a good idea to reduce the OpenVPN
# daemon's privileges after initialization.
#
# You can uncomment this out on
# non-Windows systems.
;user nobody
;group nobody

# The persist options will try to avoid
# accessing certain resources on restart
# that may no longer be accessible because
# of the privilege downgrade.
persist-key
persist-tun

# Output a short status file showing
# current connections, truncated
# and rewritten every minute.
status /root/openvpn-2.0.9/easy-rsa/keys/openvpn-status.log

# By default, log messages will go to the syslog (or
# on Windows, if running as a service, they will go to
# the "\Program Files\OpenVPN\log" directory).
# Use log or log-append to override this default.
# "log" will truncate the log file on OpenVPN startup,
# while "log-append" will append to it. Use one
# or the other (but not both).
;log openvpn.log
;log-append openvpn.log

# Set the appropriate level of log
# file verbosity.
#
# 0 is silent, except for fatal errors/root/openvpn-2.0.9/easy-rsa/keys
# 4 is reasonable for genera/root/openvpn-2.0.9/easy-rsa/keysl usage
# 5 and 6 can help to debug connection problems
# 9 is extremely verbose
verb 3

# Silence repeating messages. At most 20
# sequential messages of the same message
# category will be output to the log.
;mute 20


openvpn服务器是red hat Linux
客户机是windows server 2000 两个网卡 开起了rip协议
server ip: 172.16.37.83 虚拟ip 10.0.0.1;
client1 ip:172.16.37.110 192.168.11.1 虚拟IP 10.0.0.5;
client2 ip: 172.16.19.22. 192.168.12.1 虚拟ip 10.0.0.13;
在server中可ping通10.0.0.1 172.16.37.83 172.16.37.110 172.16.19.22 192.168.11.1 192.168.12.1 ping不通 10.0.0.5 10.0.0.13
client1 中可ping通 172.16.37.83 172.16.37.110 172.16.19.22 192.168.11.1 192.168.12.1 10.0.0.5 10.0.0.13 ping不通 10.0.0.1

client2中可ping通 172.16.37.83 172.16.37.110 172.16.19.22 192.168.11.1 192.168.12.1 10.0.0.5 10.0.0.13 ping不通 10.0.0.1
楼主这是哪出现了问题呢?拜托拜托
XiaoHui 回复于 2009-10-12 18:47:
Tooooooo looooooooog, 看着头晕又不方便比较。 能不能把 #的注释去掉再贴上来。

是谁 于 2009-10-12 15:19(14 年以前) 发表:
心头的痛啊,自1996年以来14年啦,不知道这个万恶的暂住证为什么还他妈的存在!

藤苇 于 2009-10-12 19:23(14 年以前) 发表:
client
dev tap
;dev tun
;dev-node MyTap
proto tcp
;proto udp
remote 172.16.37.83 1194
;remote my-server-2 1194
;remote-random
resolv-retry infinite
nobind
;user nobody
;group nobody
persist-key
persist-tun
;http-proxy-retry # retry on connection failures
;http-proxy [proxy server] [proxy port #]
;mute-replay-warnings
ca ca.crt
cert client1.crt
key client1.key
;ns-cert-type server
;tls-auth ta.key 1
;cipher x
comp-lzo
verb 3
服务器配置
;local a.b.c.d
port 1194
proto tcp
;proto udp
dev tap
;dev tun
;dev-node MyTap
ca /root/openvpn-2.0.9/easy-rsa/keys/ca.crt
cert /root/openvpn-2.0.9/easy-rsa/keys/server.crt
key /root/openvpn-2.0.9/easy-rsa/keys/server.key # This file should be kept secret
dh /root/openvpn-2.0.9/easy-rsa/keys/dh1024.pem
server 10.0.0.0 255.255.255.0
ifconfig-pool-persist ipp.txt
;server-bridge 10.8.0.4 255.255.255.0 10.8.0.50 10.8.0.100
;push "route 192.168.11.0 255.255.255.0"
;push "route 192.168.13.0 255.255.255.0"
client-config-dir /usr/local/etc/ccd
;route 192.168.40.128 255.255.255.248
client-config-dir /usr/local/etc/ccd
;route 10.9.0.0 255.255.255.252
;learn-address ./script
;push "redirect-gateway"
;push "dhcp-option DNS 10.8.0.1"
;push "dhcp-option WINS 10.8.0.1"
;duplicate-cn
keepalive 10 120
;tls-auth ta.key 0 # This file is secret
;cipher BF-CBC # Blowfish (default)
;cipher AES-128-CBC # AES
;cipher DES-EDE3-CBC # Triple-DES
comp-lzo
;max-clients 100
;user nobody
;group nobody
persist-key
persist-tun
status /root/openvpn-2.0.9/easy-rsa/keys/openvpn-status.log
;log openvpn.log
;log-append openvpn.log
verb 3
;mute 20


openvpn服务器是red hat Linux
客户机是windows server 2000 两个网卡 开起了rip协议
server ip: 172.16.37.83 虚拟ip 10.0.0.1;
client1 ip:172.16.37.110 192.168.11.1 虚拟IP 10.0.0.5;
client2 ip: 172.16.19.22. 192.168.12.1 虚拟ip 10.0.0.13;
在server中可ping通10.0.0.1 172.16.37.83 172.16.37.110 172.16.19.22 192.168.11.1 192.168.12.1 ping不通 10.0.0.5 10.0.0.13
client1 中可ping通 172.16.37.83 172.16.37.110 172.16.19.22 192.168.11.1 192.168.12.1 10.0.0.5 10.0.0.13 ping不通 10.0.0.1

client2中可ping通 172.16.37.83 172.16.37.110 172.16.19.22 192.168.11.1
192.168.12.1 10.0.0.5 10.0.0.13 ping不通 10.0.0.1
楼主这是哪出现了问题呢?拜托拜托 我的QQ是137294593加我 谢谢

藤苇 于 2009-10-12 19:23(14 年以前) 发表:
client
dev tap
;dev tun
;dev-node MyTap
proto tcp
;proto udp
remote 172.16.37.83 1194
;remote my-server-2 1194
;remote-random
resolv-retry infinite
nobind
;user nobody
;group nobody
persist-key
persist-tun
;http-proxy-retry # retry on connection failures
;http-proxy [proxy server] [proxy port #]
;mute-replay-warnings
ca ca.crt
cert client1.crt
key client1.key
;ns-cert-type server
;tls-auth ta.key 1
;cipher x
comp-lzo
verb 3
服务器配置
;local a.b.c.d
port 1194
proto tcp
;proto udp
dev tap
;dev tun
;dev-node MyTap
ca /root/openvpn-2.0.9/easy-rsa/keys/ca.crt
cert /root/openvpn-2.0.9/easy-rsa/keys/server.crt
key /root/openvpn-2.0.9/easy-rsa/keys/server.key # This file should be kept secret
dh /root/openvpn-2.0.9/easy-rsa/keys/dh1024.pem
server 10.0.0.0 255.255.255.0
ifconfig-pool-persist ipp.txt
;server-bridge 10.8.0.4 255.255.255.0 10.8.0.50 10.8.0.100
;push "route 192.168.11.0 255.255.255.0"
;push "route 192.168.13.0 255.255.255.0"
client-config-dir /usr/local/etc/ccd
;route 192.168.40.128 255.255.255.248
client-config-dir /usr/local/etc/ccd
;route 10.9.0.0 255.255.255.252
;learn-address ./script
;push "redirect-gateway"
;push "dhcp-option DNS 10.8.0.1"
;push "dhcp-option WINS 10.8.0.1"
;duplicate-cn
keepalive 10 120
;tls-auth ta.key 0 # This file is secret
;cipher BF-CBC # Blowfish (default)
;cipher AES-128-CBC # AES
;cipher DES-EDE3-CBC # Triple-DES
comp-lzo
;max-clients 100
;user nobody
;group nobody
persist-key
persist-tun
status /root/openvpn-2.0.9/easy-rsa/keys/openvpn-status.log
;log openvpn.log
;log-append openvpn.log
verb 3
;mute 20


openvpn服务器是red hat Linux
客户机是windows server 2000 两个网卡 开起了rip协议
server ip: 172.16.37.83 虚拟ip 10.0.0.1;
client1 ip:172.16.37.110 192.168.11.1 虚拟IP 10.0.0.5;
client2 ip: 172.16.19.22. 192.168.12.1 虚拟ip 10.0.0.13;
在server中可ping通10.0.0.1 172.16.37.83 172.16.37.110 172.16.19.22 192.168.11.1 192.168.12.1 ping不通 10.0.0.5 10.0.0.13 192.168.11.1 192.168.12.1
client1 中可ping通 172.16.37.83 172.16.37.110 172.16.19.22 192.168.11.1 192.168.12.1 10.0.0.5 10.0.0.13 ping不通 10.0.0.1

client2中可ping通 172.16.37.83 172.16.37.110 172.16.19.22 192.168.11.1
192.168.12.1 10.0.0.5 10.0.0.13 ping不通 10.0.0.1
楼主这是哪出现了问题呢?拜托拜托 我的QQ是137294593加我 谢谢


当前页: 240 / 376
所有页面: [1]  [2]  [3]  [4]  [5]  [6]  [7]  [8]  [9]  [10]  [11]  [12]  [13]  [14]  [15]  [16]  [17]  [18]  [19]  [20]  [21]  [22]  [23]  [24]  [25]  [26]  [27]  [28]  [29]  [30]  [31]  [32]  [33]  [34]  [35]  [36]  [37]  [38]  [39]  [40]  [41]  [42]  [43]  [44]  [45]  [46]  [47]  [48]  [49]  [50]  [51]  [52]  [53]  [54]  [55]  [56]  [57]  [58]  [59]  [60]  [61]  [62]  [63]  [64]  [65]  [66]  [67]  [68]  [69]  [70]  [71]  [72]  [73]  [74]  [75]  [76]  [77]  [78]  [79]  [80]  [81]  [82]  [83]  [84]  [85]  [86]  [87]  [88]  [89]  [90]  [91]  [92]  [93]  [94]  [95]  [96]  [97]  [98]  [99]  [100]  [101]  [102]  [103]  [104]  [105]  [106]  [107]  [108]  [109]  [110]  [111]  [112]  [113]  [114]  [115]  [116]  [117]  [118]  [119]  [120]  [121]  [122]  [123]  [124]  [125]  [126]  [127]  [128]  [129]  [130]  [131]  [132]  [133]  [134]  [135]  [136]  [137]  [138]  [139]  [140]  [141]  [142]  [143]  [144]  [145]  [146]  [147]  [148]  [149]  [150]  [151]  [152]  [153]  [154]  [155]  [156]  [157]  [158]  [159]  [160]  [161]  [162]  [163]  [164]  [165]  [166]  [167]  [168]  [169]  [170]  [171]  [172]  [173]  [174]  [175]  [176]  [177]  [178]  [179]  [180]  [181]  [182]  [183]  [184]  [185]  [186]  [187]  [188]  [189]  [190]  [191]  [192]  [193]  [194]  [195]  [196]  [197]  [198]  [199]  [200]  [201]  [202]  [203]  [204]  [205]  [206]  [207]  [208]  [209]  [210]  [211]  [212]  [213]  [214]  [215]  [216]  [217]  [218]  [219]  [220]  [221]  [222]  [223]  [224]  [225]  [226]  [227]  [228]  [229]  [230]  [231]  [232]  [233]  [234]  [235]  [236]  [237]  [238]  [239]  [240]  [241]  [242]  [243]  [244]  [245]  [246]  [247]  [248]  [249]  [250]  [251]  [252]  [253]  [254]  [255]  [256]  [257]  [258]  [259]  [260]  [261]  [262]  [263]  [264]  [265]  [266]  [267]  [268]  [269]  [270]  [271]  [272]  [273]  [274]  [275]  [276]  [277]  [278]  [279]  [280]  [281]  [282]  [283]  [284]  [285]  [286]  [287]  [288]  [289]  [290]  [291]  [292]  [293]  [294]  [295]  [296]  [297]  [298]  [299]  [300]  [301]  [302]  [303]  [304]  [305]  [306]  [307]  [308]  [309]  [310]  [311]  [312]  [313]  [314]  [315]  [316]  [317]  [318]  [319]  [320]  [321]  [322]  [323]  [324]  [325]  [326]  [327]  [328]  [329]  [330]  [331]  [332]  [333]  [334]  [335]  [336]  [337]  [338]  [339]  [340]  [341]  [342]  [343]  [344]  [345]  [346]  [347]  [348]  [349]  [350]  [351]  [352]  [353]  [354]  [355]  [356]  [357]  [358]  [359]  [360]  [361]  [362]  [363]  [364]  [365]  [366]  [367]  [368]  [369]  [370]  [371]  [372]  [373]  [374]  [375]  [376]  
首页 随笔 乐走天涯 猎户星 Google Earth 程序资料 程序生活 评论 Tag 论坛 资源 搜索 联系 关于 隐私声明 版权声明 订阅邮件

程序员小辉 建站于 1997 ◇ 做一名最好的开发者是我不变的理想。
Copyright © XiaoHui.com; 保留所有权利。